Input/Output Connectors; Control Signals - Sony DVO-1000MD Manual

Input/Output Connectors

Analog video inputs
VIDEO IN (BNC type × 2, loop-
through with 75 Ω automatic
terminator), Composite, 1.0 Vp-p,
75 Ω, sync negative
S-VIDEO IN (4-pin mini DIN × 2,
loop-through with 75 Ω automatic
terminator)
Y: 1.0 Vp-p
C: 0.286 Vp-p (NTSC), 0.3 Vp-p
(PAL), color burst, 75 Ω, sync
negative
Analog video outputs
VIDEO OUT (BNC type × 1)
Composite, 1.0 Vp-p, 75 Ω, sync
negative
S-VIDEO OUT (4-pin mini DIN × 1)
Y: 1.0 Vp-p
C: 0.286 Vp-p (NTSC), 0.3 Vp-p
(PAL), color burst, 75 Ω, sync
negative
Analog audio inputs
AUDIO IN L/R (Phono jack × 1 for
each channel), 2 Vrms (Full bit),
input impedance 47 kΩ or more,
unbalanced
Analog audio outputs
AUDIO OUT L/R (Phono jack × 1 for
each channel), 2 Vrms (Full bit),
load impedance 47 kΩ, unbalanced
MONITOR AUDIO (Phono jack × 1) 2
Vrms (Full bit), load impedance
47 kΩ, unbalanced
Digital signal
DV IN (i.LINK)
6-pin, complying with IEEE1394

Control Signals

REMOTE 1 Stereo mini jack, for connection of an
SVRM-100A remote control unit
(not supplied)
REMOTE 2 Mini jack, for connection of a foot
switch (not supplied)
REMOTE IN RS-232C
D-sub 9-pin, asynchronous serial
USB (Universal Serial Bus)
Specification Revision 2.0 (up to Full
Speed)
16
Specifications
Others
Supplied accessories
Before Using This Unit (1)
CD-ROM (1)
Warranty booklet (1)
Accessories not supplied
SVRM-100A Remote Control Unit
Medical Specifications
Protection against electric shock:
Class I
Protection against harmful ingress of
water:
Ordinary
Degree of safety in the presence of a
flammable anesthetic mixture with
air or with oxygen or nitrous oxide:
Not suitable for use in the presence
of a flammable anesthetic mixture
with air or with oxygen or nitrous
oxide
Mode of operation:
Continuous
Recommended disc
Sony recommends Sony-branded DVD+RW recording media
for use with your DVO-1000MD.
Design and specifications are subject to change without
notice.
Notes
• Always make a test recording, and verify that it was
recorded successfully.
SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF FAILURE OF THIS UNIT OR ITS
RECORDING MEDIA, EXTERNAL STORAGE
SYSTEMS OR ANY OTHER MEDIA OR STORAGE
SYSTEMS TO RECORD CONTENT OF ANY TYPE.
• Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF THIS
UNIT, EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE WARRANTY, OR
FOR ANY OTHER REASON WHATSOEVER.