KFV USV Series Description, Specification And Installation Instructions page 16

FZ-USV-230 (SXM 2540)
4.2. Power Supply input connection
Before connecting the power to the unit it is advisable to review the wiring diagram
again for correct installation (see Fig 1) .
Before connecting the AC power ON check the output voltage selector to ensure
that it is correct ;
Jumper 1 OFF = 12 VDC
Jumper 1 ON = 24 VDC (Genius / Fliethomatic)
The actual output voltage is Factory set and re-adjusting it will void the warranty.
4.3. Output Connections
Connect the Genius or Fliethomatic to the terminals DC (+) and DC (-) observing
polarity (see Fig. 2).
Terminal 2 = + = DC (+)
Terminal 3 = - = DC (-)
Ground (Shielded) = - = DC (-) =
Stand: 10.03.2008
[ENG]
page 16 from 21