Larson Electronics RCL-336 Instruction Manual

Remote Control Thermal Imaging Camera System - 12V - Wireless
Please read these instructions before using your new remote control thermal imaging camera system.
The camera's wireless remote are designed to be attached to a vehicle using a magnetic or per-manent mount and
operated by a wireless remote control. Each spotlight has 360° horizontal rotation and 135° vertical tilt.
Introduction
The Thermal Imaging Camera System can help a driver identify pedestrians in front of their vehicle during low light
situations. The Thermal Imaging Camera System is capable of identifying the objects generating heat, displaying them
on a screen, and improving the driver's experience.
The infrared thermal imager detects infrared energy (heat) through a non-contacting method, converts it to an electric
signal, and generates a thermal image that appears on a screen. The infrared thermal imager is an inspection device
which can be used to calculate the temperature. It can also precisely quantize and measure the detected heat, so that
you can observe the thermal image and accurately identify animals and pedestrians.
Per the statistics of the National Highway Traffic Safety Administration, while night driving only accounts for 25% of total
road traffic, the number of fatal accidents accounts for 50%. This makes having the Thermal Imaging Camera System
an important safety accessory for any driver.
Product Overview
Object Identification: Identify animals and pedestrians during low light situations.
Animal Detection Animal Detection
Larson Electronics, LLC
or Wired Remote - 6" LCD Monitor
Instruction Manual
Phone: (800) 369-6671
Pedestrian Detection Pedestrian Detection
Fax: (903) 498-3364 www.larsonelectronics.com
RCL-336
1 of 10