Table Of Contents - Fiio X7 How To Assemble & Disassemble

Table of Contents

Tools Required2
Separate The Amp Module From The X7 Body3
Heat The Right Side Of The Module Front Cover4
Insert The Tweezer Tip Into The Module5
Reheat The Right Side Of The Front Cover6
Insert The Art Knife Blade Into The Module7
Reheat The Front Cover8
Take Off The Front Cover9
Disassemble The Plastic Frame And Pcb11
Separate The Pcb Boards12
Parts After Disassembled13
Clean The Remained Glue14
Assembly The Pcb15
Assemble The Shell16
Stick The Front Cover To The Frame17
Press And Fix The Front Cover18
Final Check19