Controls; Power Button; Fan Speed Button; Mode Button - ProBreeze PB AC04 Instruction Manual

Controls

Power Button

Turn the appliance on and off.

Fan Speed Button

Select between high and low fan speeds.
Note: Option not available in dehumidifying
mode.

Mode Button

Select between auto, cooling, dehumidifying,
and fan-only modes.
•
Auto Mode - The appliance automatically
selects between cooling mode and fan only
mode based off the room temperature. If
the room temperature is greater than or
equal to 24°C the appliance will activate
cooling mode. If the room temperature is
less than 24°C the appliance will activate
fan-only mode.
•
Cooling Mode - Perfect for cooling a room
in hot weather. Use the up and down
buttons when in cooling mode to set the
desired temperature between 15-31°C. The
appliance will cool the room if the room
temperature goes above the set
temperature. If the room temperature goes
below the set temperature the appliance
will stop cooling the room and the fan will
remain operating at the set fan speed.
Note: The heat exhaust hose must be
connected to allow the hot and humid air
to be discharged outside.
Dehumidifying Mode - Ideal for reducing
•
room humidity in humid and damp times of
year. The appliance will dehumidify the room if
the room temperature is greater than or equal
to 15°C or less than or equal to 35°C and the
fan operates at the low fan speed. If the room
temperature decreases to less than 15°C or
increases to more than 35°C the appliance will
stop dehumidifying the room and the fan
operates at the low fan speed.
Note:
-
The temperature cannot be set in
dehumidifying mode.
- The fan speed cannot be set in dehumidifying
mode and the appliance runs in low fan speed.
-
The heat exhaust hose must be connected to
allow the hot and humid air to be discharged
outside.
• Fan-Only Mode - The appliance operates at
the set fan speed. Room temperature is
displayed on the digital display panel. Note:
The heat exhaust hose does not have to be
connected to the appliance.
Note: Temperature can only be set when in
cooling mode.
Sleep Mode Button
Set sleep mode to reduce energy consumption
when in cooling mode.
Fan speed with automatically reduce to low fan
speed.
After one hour the set temperature will increase
automatically by 1°C. After two hours the set
temperature will increase automatically by a
further 1°C. After six hours the appliance will turn
off.
English | 04 English | 10