Programme chart
Proofing
Items
Treating microfibre fabric, ski wear or table linen made from mainly
synthetic fibres to provide a finish which is resistant to water and dirt
Tip
– The items must be freshly laundered and spun or dried before
proofing.
– For best results, the items should be heat-treated afterwards. This
can be achieved by drying them in the tumble dryer or ironing
them.
Drain/Spin
Tip
– Drain only: Set spin speed to .
– Make sure you select the appropriate spin speed.
Separate rinse/Starch
Items
– Rinsing hand-washed items
– Table cloths, serviettes and workwear requiring starching
Tip
– Reduce the spin speed for fabric that creases easily.
– Laundry that is to be starched should be washed but not treated
with fabric conditioner.
– Items will be rinsed very effectively with 2 rinses by activating the
Water + extra.
34
40 °C
Max. load 2.5 kg
–
Max. load 8.0 kg