Rear Panel; Connectors - Medeli YoDrum G1 Owner's Manual

Rear panel

1. USB-C: USB To Host jack
To connect to computers or mobile devices, then YoDrum will
function as a USB MIDI or USB audio device. When connected,
you can set YoDrum as an output to play MIDI or audio files.
2. USB-A: USB To Device jack
To connect to USB storage devices, such as USB flash memory,
and play songs stored on them.
This port can also charge devices (such as phones) connected to
it (5V/500mA).

Connectors

YoDrum features four groups of connectors located on the U bend.
Plug the cables into the corresponding jacks as labeled:
A:
Function
Jack
Hi-Hat Connect Hi-Hat cymbal
Hi-Hat Control Connect Hi-Hat Control
DC 9V Connect the adaptor
PHONES Connect stereo phones to hear sound from all
connected equipment
LINE IN Connect external audio device
LINE OUT Connect to audio system or amplifier
MIDI IN Receive YoDrum MIDI data or receive MIDI data from
an external MIDI device or computer
MIDI OUT Send YoDrum MIDI data or send MIDI data to an
external MIDI device or computer
NOTICE:
The last connected MIDI will be the default MIDI I/O. If the currently
selected MIDI is disconnected, then the MIDI will be rearranged
according to its priority. If Bluetooth and USB MIDI are all disconnected,
then it will select the standard MIDI I/O.
B:
Jack Function
CRASH 1 Connect CRASH1 cymbal
SNARE Connect SNARE pad
TOM1 Connect TOM1 pad
SPLASH Connect extra SPLASH cymbal
C:
Jack Function
KICK Connect KICK pad
TOM2/3 Connect TOM 2/3 pad
CRASH2/RIDE Connect CRASH2 or RIDE cymbal
NOTICE:
If your YoDrum is a standard model (with three cymbals and five pads),
then we recommend plugging in the RIDE cable here. If your YoDrum
has a CRASH2 then you should plug in the CRASH2 cable here and
plug in your RIDE cymbal to Group D.
D:
Jack Function
CHINA Connect CHINA
● Reserved
RIDE Connect RIDE cymbal
TOM4 Connect extra TOM4 pad
Panel Description
USB－C
1
B
A
USB－A
2
C
D
7