Fitting The Handlebar - Argos Pazzaz Quick Assembly Manual

1.- FITTING THE HANDLEBAR

Insert the handlebar into the frame. If
A
necessary loosen the stem bolt at the top of
the handlebars and stem to allow the wedge
nut to move freely. Make sure the minimum
insertion mark is not visible once this is fitted.
The handlebar must be inserted beyond this
point.
MINIMUM
INSERTION
MARK
BIKE FRAME
IF YOU ARE EXPERIENCING ANY PROBLEMS PLEASE CALL 0161 813 1745 BEFORE RETURNING BIKE TO STORE
HANDLEBAR
ALLEN BOLT
The handlebar must be straight. Align this with the fork by
B
looking downwards at it. The brakes must be facing the front
of the bike. Use the allen key to tighten the bolt on top of the
handlebar stem. Do not fully tighten until the end as you may
need to adjust the height.
TOP VIEW
Front of bike
BRAKES
FORK
Rear of bike
TOOLS NEEDED
ALLEN KEY
Rear of bike
Front of bike
3