Fitting The Reflectors & Bell - Argos Pazzaz Quick Assembly Manual

7.- FITTING THE REFLECTORS & BELL
A
First fully release the securing screws as shown
(anti-clockwise)
BELL RED REFLECTOR
C
Once these are in place, replace the screws and tighten by turning clockwise using a cross-head screwdriver
IF YOU ARE EXPERIENCING ANY PROBLEMS PLEASE CALL 0161 813 1745 BEFORE RETURNING BIKE TO STORE
B
WHITE REFLECTOR
Wrap the bell around the handlebar as shown, remembering
to put it in a place where you can reach it easily whilst riding.
Then wrap the white reflector around the handlebar near the
centre, and wrap the red reflector in the same way around
the saddle post.
HANDLEBAR
(Bell and White Reflector)
TOOLS NEEDED
CROSS HEAD
SCREWDRIVER
SADDLE
(Red Reflector)
10