Advertisement
Disassembly instructions
Equipment
: The use of TK13OD® tool is re-
commended for turnkey teeth disassembly.
Always work safely and wear your safety
equipment (hard hat, steel-toed shoes,
gloves, safety glasses).
Keep bystanders away.
Teeth removal
: Once the pin is removed,
you can easily remove teeth & adapter
wear cap.
TURNKEY® pins Installation and Removal,
TURNKEY® Range. ®
Protective caps removal
: Remove both
Left/right protective caps thanks to TK13
OD® tool.
If there is no cap, remove fines from pin
head hole to make sure the TK13 OD® tool
will correctly fit into the pin head hole.
4
Sleeve removal
: To remove the sleeve, use
TK13OD® flat side and manually push the
sleeve from adapter left side.
Boulevard de la Boissonnette - 42110 - FEURS
1
Pin unlocking
: Once TK13OD® tool is
inserted into the pin, unlock the pin with a
180° clockwise turn.
"clac"
You will hear a
the pin was successfully unlocked.
5
Sleeve removal (2)
: Once the plug is par-
tially removed, you can complete removal
manually.
FEURST
Tel : 04.77.27.40.63
Fax : 04.77.27.09.84
2
Pin removal
: Using TK13OD® tool, remove
the pin from the teeth/sleeve. You can also
remove the pin manually.
sound confirming
6
Cleaning
: Clean up the adapter nose,
sleeve housing and wear cap dovetail
guidance.
We advise to use a new pin and a new
sleeve for next teeth installation.
3
7
Advertisement
