Replacing The Oven Light Bulb (2590S Only)) - Tricity Bendix 2560S Operating And Installation Instructions

REPLACING THE OVEN LIGHT BULB
(2590S GOURMET ONLY)
The type of bulb required is a 300C 25 watt small
Edison Screw. Part number 572 491 5431-00/1
(Available through the Tricity Bendix service
centres).
CAUTION:
Disconnect the appliance from the
electricity supply before replacing the bulb.
Open the door and remove the shelves to enable
easy access to the oven light assembly. Insert a flat
blade screwdriver between the oven side and the
glass which covers the bulb.
Support the glass with your hand and prise out
sufficiently to release the glass cover. Unscrew the
bulb in an anticlockwise direction until it is possible to
remove the bulb with ease.
Fit the new bulb by turning in a clockwise direction
until it is secure. Ensuring the indent to the flange is
pointing to the rear of the oven, replace the glass by
pushing it firmly into the hole to cover the bulb
assembly.
Replace the shelves. Restore the electricity supply
and adjust the time of day and clock, as necessary.
29