Novus NVB-5000CA User Manual page 4

MOUNTING
4. MOUNTING THE CORNER ADAPTOR
Adapter should be attached to structures or surfaces being able to safely lift the mass both
of the adapter and device attached. Put the adapter to the wall in a desired mounting place
(with cable hole). Taking the adapter's base screw holes as a pattern, mark future drilling
holes for screws using a punch. Drill 4 holes in accordance with previously done
markings and base hole placement. Put required cables through the adapter and mount the
adapter.
NOTE: It is possible to mount bracket NVB-5000WB using included mounting box or
without it. Pole adaptor allows both options.
Bracket NVB-5000WB mounted with corner adaptor NVB-5000CA.
NVB-5000CA
- user's manual, ver 1.0
All rights reserved © AAT Holding Sp. z o.o.
4