Advertisement
Quick Links
Materials
WPS-DF-K
(FOR ANTENNA/ DEVICE)
Step #1 Install WPS-4A or WPS-4S and 1/2" Connector
Slide the WPS-4A or WPS-4S
onto the 1/2" cable 6-12 inches
from the end prior to cable
preparation.
Step #2 Install WPS-DF-K
Place the WPS-DF-K onto the
antenna or device female port.
13009-01 Rev. C
7645 Henry Clay Blvd. | Liverpool, NY 13088 | Tel: 315-431-7100 | customerservice@jmawireless.com | www.jmawireless.com
WPS-4A / WPS-4S
(FOR CONNECTORS)
Prep and install the 1/2"
cable to install the JMA
Wireless compression
connector. Refer to the 1/2"
annular install instructions.
Ensure that the WPS-DF-K is
properly placed on the antenna
or device port, positioned just
past the threads.
Install Instructions
JMA Wireless Weather Protection System
For 1/2" Connectors to Antenna or Device
1/2" JMA WIRELESS
CONNECTOR
Properly installed WPS-DF-K.
TQ-114-F18
TORQUE WRENCH
Advertisement
Related Manuals for JMA WPS-DF-K
Summary of Contents for JMA WPS-DF-K
- Page 1 Wireless compression preparation. connector. Refer to the 1/2” annular install instructions. Step #2 Install WPS-DF-K Place the WPS-DF-K onto the Ensure that the WPS-DF-K is Properly installed WPS-DF-K. antenna or device female port. properly placed on the antenna or device port, positioned just past the threads.
- Page 2 Completed installation of the jMA Wirelss Weather over the 1/2” connection completely cover the first making sure to overlap the set of WPS-DF-K grooves as Protection System. port seal. shown. 13009-01 Rev. C 7645 Henry Clay Blvd. | Liverpool, NY 13088 | Tel: 315-431-7100 | customerservice@jmawireless.com| www.jmawireless.com...
Need help?
Do you have a question about the WPS-DF-K and is the answer not in the manual?
Questions and answers