Advertisement
Advertisement
Table of Contents
Related Manuals for FanJu FJ3373
Summary of Contents for FanJu FJ3373
- Page 2 FJ3373 Manual FanJu FJ3373 NO RCC Weather Station Features: Perpetual Calendar Up to Year 2099 Day of week in 7 languages user selectable: English, German, Italian, French, Spanish, Netherlands and Danish Time in optional 12/24 hour format ...
-
Page 3: Weather Station Appearance
FJ3373 Manual Weather Station Appearance... - Page 4 FJ3373 Manual Part A-Positive LCD A1: Weather Forecasting, A2: Barometric pressure A3: Outdoor Temperature A4: Indoor Temperature A5: Outdoor Humidity A6: Indoor Humidity A7: Time/Calendar or Alarm time A8: Time Moon Phase Part B – Back button and power B1: “SNOOZE/LIGHT” touch field...
-
Page 5: Initial Operation
FJ3373 Manual Initial Operation: Open Weather Station battery compartment cover Insert 2 x AA batteries observing polarity [ “+” and “ –“ marks] When you insert the batteries, all the icon on the LCD display will briefly light up for 3 seconds, and you will hear a beep tone, and detect indoor temperature &... -
Page 6: Setting The Daily Alarms
FJ3373 Manual “▲” and “▼” buttons to select a language. Language Sunday Monday Tuesday Wednesday Thursday Friday Saturday German, GE English, EN French, FR Italian, IT Spanish, SP Dutch, DU Danish, DA Press“ ” to confirm your setting and to end the setting procedures, enter the clock mode F.Y.I.:... -
Page 7: Switching Off The Alarm Signal
FJ3373 Manual repeated automatically after 24 hours. Rising alarm sound (crescendo, duration: 2 minutes) changes the volume 4 times whilst the alarm signal is heard. the snooze time setting range: 5 ~ 60MIN, OFF, when set to OFF, means no snooze function. Snooze time unit is minutes. - Page 8 FJ3373 Manual Display Temperature/Humidity/ Barometric Pressure and Temperature/Humidity Trend The current indoor temperature/humidity/barometric pressure and the temperature/humidity trend (indoors) are shown in the LCD display. After successfully connecting with the outdoor sensor, the weather station can display the outdoor temperature/humidity and the temperature/humidity trend (outdoor) ...
- Page 9 FJ3373 Manual Outdoor Temperature Alert Setting Press “ ” button once to set Alert ON or OFF. “ ” icon displayed means ON and disappear means OFF. Press and hold down the “ ” button for 2 seconds until the icon for the Temperature Alert” starts to flash ...
- Page 10 FJ3373 Manual weather forecast from your local weather forecasting service into account as well as the forecast from your weather station. If there are discrepancies between the information from your device and from the local weather forecasting service, please take the advice of the latter as authoritative.
- Page 12 EU Add: China Add: FANJU TECHNOLOGY LTD FIFTH FLOOR,3 GOWER STREET , LONDON,WC1E 6HA,UNITED KINGDOM...
Need help?
Do you have a question about the FJ3373 and is the answer not in the manual?
Questions and answers
I can’t get the year to display or change the actual day ie Sunday
To display or change the year and day on the FanJu FJ3373:
1. Press the “ ” button to enter the date setting mode. The year (e.g., 2014) will start to flash.
2. Use the “▲” or “▼” buttons to set the correct year.
3. Press the “ ” button again to confirm. The month will start to flash.
4. Use “▲” or “▼” to set the month.
5. Press “ ” again to confirm. The date will start to flash.
6. Use “▲” or “▼” to set the correct date.
7. Press “ ” again to confirm and proceed to language selection for weekday display.
This process allows you to set and display the correct year and day.
This answer is automatically generated
Barómetro de estación Fanju fj3373 ha llagado descalibrado. indica 1008 hPa y lo correcto es 1020 hPa. agradeceré me informe cómo se puede calibrar esta unidad. gracias
@Cris Fanju station barometer fj3373 has arrived out of calibration. It reads 1008 hPa, but the correct reading is 1020 hPa. I would appreciate it if you could tell me how to calibrate this unit. Thank you.
Outside temp guage is flickering and not registering on main screen
The outside temperature gauge on the FanJu FJ3373 may flicker and not register on the main screen if the Weather Station fails to receive the transmission from the outdoor sensor. This can happen if the batteries are not properly inserted, the sensor is out of range (over 60 meters in open area), or there is interference with the 433.92MHz RF signal. If “--” is displayed on the LCD, press and hold the “▼” button for 3 seconds to manually initiate transmission.
This answer is automatically generated
How can I change the language on FanJu model FJ3523
To change the language on the FanJu FJ3373:
1. Enter the settings mode.
2. Use the “▲” and “▼” buttons to navigate through settings until the language selection for the weekday display starts to flash.
3. Use the “▲” and “▼” buttons to select your desired language (English, German, Italian, French, Spanish, Dutch, or Danish).
4. Press the confirm button (usually marked “ ”) to save the selection.
This answer is automatically generated
I've had the unit for about 3 weeks. Today the backlight has stopped working. No matter what I try, it will not stay on any longer than 15 seconds.
If the backlight on your FanJu FJ3373 stops working after 15 seconds, it is likely running on batteries. You can touch the top of the main station or press the “ ” button to turn the backlight on again for 15 seconds. To keep the backlight always on, plug the device into a power supply adapter, which will disable battery power and keep the backlight continuously lit. You can also adjust the brightness using the button.
This answer is automatically generated
How to adjust the barometric pressure?
To adjust the barometric pressure on the FanJu FJ3373:
1. Press the “ ” button until the pressure unit display starts to flash.
2. Use the “▲” and “▼” buttons to set the pressure unit to either “hPa” or “inHg”.
3. Press the “ ” button again to confirm the setting.
This answer is automatically generated
Wie kann man das Display Dauerlicht einstellen, denn das Licht geht nach ein paar Sekunden aus???
To set the display to permanent light on the FanJu FJ3373, connect the product to a power supply adapter. When plugged in, the battery power supply disconnects automatically, and the backlight remains always on. You can adjust the brightness using the button, selecting from three brightness levels or turning the backlight off.
This answer is automatically generated
How to adjust low temperature monitoring?
To adjust the low temperature monitoring on the FanJu FJ3373:
1. Press and hold the “
This answer is automatically generated
Come cambiano le previsioni Meteo?
how do i change from C to F temperature on a Fanju 3373. the outdoor sensor reads in F, but the indoor unit displays in C.