Advertisement
Quick Links
Pink Single Swing
Assembly & User Instructions -
Important
Age: 3 - 8 years
Maximum user
weight: 45kg
Important -
Please read these instructions fully before assembly or use.
These instructions contain important information which will help you get the best from your
product and ensure safe and correct assembly, use and maintenance.
If you need help or have damaged or missing parts, call the Customer Helpline: (+44) 0330 0904 420
Please keep for future reference
Tips: It will take 2 adults
around 30 minutes to
assemble.
366/6881
Advertisement
Related Manuals for Chad Valley Pink 366/6881
Summary of Contents for Chad Valley Pink 366/6881
- Page 1 Pink Single Swing Assembly & User Instructions - 366/6881 Please keep for future reference Important Tips: It will take 2 adults Age: 3 - 8 years around 30 minutes to Maximum user assemble. weight: 45kg Important - Please read these instructions fully before assembly or use. These instructions contain important information which will help you get the best from your product and ensure safe and correct assembly, use and maintenance.
- Page 2 Contents Warnings Parts Assembly Instructions Care and Maintenance...
- Page 3 Warnings Important –Please read these instructions fully before assembly or use. ● Packaging materials are not toys. Please remove all WARNING packaging and packing tags / wires before giving this toy to your child. ● WARNING! Not suitable for children under the age of ●...
- Page 4 Parts If you have damaged or missing parts, (+44) 0330 0904 420 call the Customer Helpline: Please Check you have all the parts fittings listed below Beamx1pc Railx2pcs Legx2pcs Seatx1pc Legx2pcs Anchorx4pcs Plastic Cap x 4pcs Legx4pcs ( M8 ) x4(M6x42mm) ×...
- Page 5 Assembly Instructions Step 1 Attach the swing seat (6) to beam (1) using U bolt(A). Insert Leg(2) and Leg (3) into beam(1) as shown in Figure 1. Note the position of the Legs need to be inversed on the two sides of the swing frame.
- Page 6 Assembly Instructions Step 2 Insert Legs (4) into legs (2) and (3) and secure together with Rail (5) as shown in figure 2. Note: -Plastic cap (8) needs to be inserted into rail (5) before securing the bolt. -Rail (5) needs to be attached to the outer sides of the swing frame.
- Page 7 Assembly Instructions Step 3 Attach anchors (7) to the base of Legs (4). Repeat this step for the other remainder anchors. TIP: AFTER FINISHING ALL STEPS ABOVE, GO OVER THE ENTIRE UNIT AND TIGHTEN ALL BOLTS. x 4pcs x 8pcs x 4pcs x 4pcs Figure 3...
- Page 8 Assembly Instructions Step 4 Anchor the swing in the ground. By following the previous steps, your single swing should look as shown in the figure 4. Figure 4 6-8CM...
- Page 9 Assembly Instructions SEAT ADJUSTABLE GUIDE THE LENGTH OF THE ROPE IS ADJUSTABLE FOR THE HEIGHT OF THE CHILD THROUGH THE SEAT CONNECTOR. TO ADJUST, LOOSEN THE KNOT ON THE SEAT CONNECTOR, PULL ROPE THROUGH THE HOLES AND TIGHTEN AGAIN. MAKE SURE THAT THE KNOTS ARE TIGHT AND THAT BOTH ROPES ARE ADJUSTED SO THAT THE SEAT IS HORIZONTAL.
- Page 10 (+44) 0330 0904 420 Produced for Chad Valley Toys. Argos Ltd. Country of origin: China Address: 489 - 499 Avebury Boulevard, Central Milton Keynes, MK9 2NW. www.argos.co.uk SP-19-SW001P-ARGOS-17001...