Troubleshooting - Coleman 90445E Owner's Manual

Trouble shooting
Important: If the detection shows "Er" or the app prompts ''Filter pump detects no water
flow", turn off the power switch and resolve the problem according to the following
solutions.
Code
Device displays "Er"
or app prompts "Filter
pump detects no water
flow"
The filter indicator lights
up or app prompts "Filter
cartridge is dirty / Low flow
rate"
Bestway Smart Hub
Download the Bestway App from the Apple Store/Google Play Store or scan the QR code.
The device can only be connected to one mobile phone at a time. If you want to connect
to another mobile phone, or your network has been changed, you can do as follows:
Press the On/Off Button
will clear the connection information of the previous mobile phone. Please follow the
instructions to connect the new mobile phone to the pump.
303021233056_90445E_14x21cm_客专2000galAPP过滤泵说明书_20N-OEM-481
Reasons
• The system detects no water
flow.
• The pump is on but the motor
isn't running.
• Control valve is closed or not
completely open.
• Debris is blocking
hoses / debris screen.
• The filter cartridge is dirty.
Connection Guide
TM
for 5 seconds. When the indicator flashes slowly, the device
7
Solutions
• Make sure that the inlet and
outlet of the pool are fully
covered by water.
• Make sure the inlet and outlet
valves are open.
• Purge air from the whole
circulation system.
• For assistance, please visit the
support website
www.bestwaycorp.com.
• Check and open the control
valve.
• Remove the blockage and reset
the alarm.
• Take out the filter cartridge and
rinse it. Replace the filter
element with a new one, in
case the alarm remains.
• For assistance, please visit the
support website
www.bestwaycorp.com.