VENETA 4 Sided L Frame Outside Mount Installation Instructions

Shutters Installation Instructions
4 Sided L Frame Outside Mount
CONGRATULATIONS on purchasing the finest shutters
in the market. You can take pride that your purchase
will enhance the function and beauty of your home.
Installation Overview

Getting Started

Step 1: Assemble Frame
Step 2: Level the Frame
Step 3: Secure the Frame
Step 4: Attach the Panels
Step 5: Add the Finishing Touch
IMPORTANT: Do not mix panels or frames from other windows. Install one shutter at a time.
Tools needed for installing your shutter:
Drill Screwdriver Pencil
Getting Started
Remove the shutter from the package. Do not discard any of the packaging material until the
shutter operates to your satisfaction. Check the diagram below to make sure you have the
necessary parts.
Frame Insert
Shutter
Panel
TM
Installation Video
Scan the QR code with
your smartphone to
follow along with video
instructions.
Level Box Knife Rubber mallet
Hoffmann
L Frame
Keys
Hinge Pins
Hinge
Hinge Frame Screws
Pins Screws (for Deadlock)
Shutter
Panel
Step 1 – Assemble the Frame
1. Carefully remove panels and frames from the packaging.
All frame parts are labeled (top, bottom, left, and right).
2. Remove frame inserts and place them away from the installation area.
3. Set all frames on a flat surface. Position each side of the frame and
line up the Hoffmann Key slot. Insert the Hoffmann Key into each
slot at the back of the frame. Use a rubber mallet if necessary.
! The Hoffmann Key has a rounded side and a flat side. The
rounded side should be inserted in slot first.
Step 2 – Level the Frame
1. Position the assembled frame evenly
around the window opening and secure
with a screw into the upper left frame
ONLY.
Step 3 – Secure the Frame
1. Once the left side is secured, level the
frame on the window and secure with a
screw into the upper right frame. Shutter
will be fully secured in later steps.