SleepPhones Wireless Instruction Manual

Instruction Guide for SleepPhones® Wireless
1
1. Holding the SleepPhones® in your hands, you'll notice
the flat speakers - one on each side - inside of the
3
1
1. Locate the Bluetooth® module in
the hook & loop opening at the back
of the headband. Hold down the
middle (power) button for 5 seconds to
put it into pairing mode.
(May be helpful to refer to speaker
schematic on next page)
How to Wear your SleepPhones®
headband.
Pairing your SleepPhones® Wireless
2
2. Go into your Bluetooth®-enabled
device and make sure Bluetooth® is
turned on. Look for the device,
'ACOUSTICSHEEP' and select to pair.
2
2. Place the headband on your head. Note that the
SleepPhones® logo tag goes at the back of your head.
3. Once the headband is on, you'll want to adjust the
speakers so that they are positioned directly over your
ears. This will ensure great sound quality. Please note that
the speakers move inside of the headband, independently
of the headband.
!
3
3. You should now be able to
play music through your
SleepPhones® Wireless
headphones. Great for listening
to audio books, nature sounds,
podcasts, etc!