Bodypoint EVOFLEX EB205 Installation And User Instructions

These instructions provide important information for the safe use and maintenance
of the Bodypoint Evoflex ™ Pelvic Stabilizer. Give these instructions to the user or their
caregiver and review them to ensure that they are understood.
WARNING! Product should be installed and fitted by a qualified rehab
technician.
USE:
This product should only be used for positioning a person in a
WARNING!
wheelchair. It is NOT intended for use as a transportation safety device, as a
personal restraint device, or in any other application where its failure could result in
injury. Misuse of this product is unauthorized and unsafe.
This pelvic stabilizer must be worn tightly fitted across the lower
WARNING!
pelvis or thighs at all times. A loose belt can allow the user to slip down and create
a risk of strangulation. Have your seating specialist demonstrate its proper
adjustment and use.
Accidental release of this pelvic stabilizer can allow the user to slip
WARNING!
down or fall from the wheelchair. If the user's movements or cognitive abilities could
lead to accidental release, a caregiver must be present at all times during its use.
Ensure that all caregivers know how to unfasten the product. Failure to do so may
delay release in an emergency.
As with any new seating support, this product may change the way
WARNING!
a person sits. Users must continue to practice regular pressure relief activities and
skin integrity checks, not only where this product contacts the user, but also in
primary pressure-bearing areas such as the sacrum, legs, and buttocks. If increased
skin redness or irritation occurs, discontinue use and consult your physician or
seating specialist. Failure to do so may result in serious injury, such as pressure
ulcers.
MAINTENANcE: Check periodically for signs of wear in the stitching, webbing,
and pads. If significant wear is found, contact your supplier for qualified repair or
replacement by Bodypoint. Under no circumstance should this product be altered
or repaired by unqualified persons–health and safety depend on it!
40C Machine wash, warm, 40°C (100°F). Do not bleach.
clEANING:
Tumble dry, low temperature, or drip dry. Do not iron. (Placing the product inside a
cloth bag during washing helps prevent scratches to the product and the machine.)
ATTENTION: WARRANTY AGAINST DEFEcTS
A copy of this warranty is also available at www.seatingdynamics.com.au.
Warranty period: 12 months limited.
1. Seating Dynamics Pty Ltd ABN 21 086 494 117 ("SDL") undertakes to
the end purchaser (the "Customer") that the Products will be free of faults
arising from defects in Workmanship or Materials for the duration of the
Warranty Period on the terms and conditions set out in this Warranty.
2. In this Warranty the following definitions apply:
a. Form means a warranty claim form issued by Seating Dynamics Pty Ltd in
respect of the Products.
b. Products means the goods distributed or sold by SDL set out in the
table above.
c. Material means a material or component used by the manufacturer in the
manufacture of Products distributed and/or sold by SDL.
d. Retailer means the authorised dealer of Products from whom the Customer
purchased the Product.
e. Warranty Period means the warranty period set out in the table above,
commencing from the date of purchase of the Product by the Customer.
f. Workmanship means the handling, assembly and manufacturing processes
performed by or on behalf of SDL in order to manufacture the Products.
3. SDL undertakes that if the Customer wants to make a claim during the
Warranty Period for any Product, or any part of a Product that has failed
to operate
correctly as a result of faulty Workmanship or defective Material, SDL will
subject to this Warranty, repair or replace the Product or part (as the case
may be) free of charge (excluding freight costs) to the Customer as long as
the
following conditions are met:
a. The Customer must contact the Retailer or SDL (whose contact details are
located at the bottom of this Warranty), as soon as the Customer becomes
aware of any defect in the Product. The Customer will be required to
complete a Form and provide to SDL satisfactory proof of the date of
purchase of the Product;
b. SDL will review the Form and determine whether there is a defect;
c. If SDL requests the return of the applicable Product or part, the Customer
will be responsible for the collection and freight costs of returning
that Product or part to SDL; and
d. The Customer must pay all applicable freight costs when claiming
under this warranty.
4. If the Product or part (as the case may be) is repaired or replaced
during the Warranty Period, this Warranty remains based on the original
date of purchase.
5. The benefits given to the Customer in this Warranty are in addition to any
other rights or remedies under a law in relation to the Products to which the
Warranty applies.
6. This Warranty does not extend to damage to Products which occurs during
transit/transportation, or loading/unloading before or after transit/transpor-
tation, or which is caused by any abuse, accident or improper installation,
connection, use, adjustment or repair or use of goods otherwise than in
accordance with instructions issued by SDL.
7. To the extent permitted by law, the warranty on Products is waived if any
addition or attachment to the Products does not have SDL's approval or are
not sold as SDL Products. The Products are designed to perform specific tasks
under established test loads and unauthorised attachments may produce
stresses for which the design is not appropriate.
8. The following applies to Customers who purchased the Product in Australia:
In the following paragraph "goods' means "Products" and "you" means the
"Customer".
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You
are also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
9. Notwithstanding the preceding paragraph, the liability of SDL for a breach
of a consumer guarantee or any warranty made under these Warranty terms
for any Products not of a kind ordinarily acquired for personal, domestic or
household use is limited, to the extent permissible by law and at the option
of SDL in relation to the Products supplied, to:
a. The replacement of the Products or the supply of equivalent Products;
b. The repair of the Products;
c. The payment of the cost of replacing the Products or of acquiring
equivalent Products; or
d. The payment of the costs of having the Products repaired.
10. To the extent permitted by law, all other warranties whether implied or oth-
erwise that are not set out in this Warranty are excluded and SDL shall be
under no liability in contract, tort (including without limitation, negligence
or breach of statutory duty) or otherwise to compensate the Customer for:
a. Increased costs or expenses;
b. Any loss of profit, revenue, business, contracts or anticipated savings;
c. Any loss or expense resulting from a claim by a third party; or
d. Any special, indirect or consequential losses or damage of any nature
whatsoever caused by SDL's failure to complete or delay in completing the
order to deliver the Products.
11. This Warranty is not applicable outside Australia.
cONTAcT INFORMATION
Glen Curtin
Seating Dynamics Pty Ltd, Unit 3, 19 Boden Rd, Seven Hills,
NSW 2147
Telephone: +61 2 9620 7839, Facsimile: +61 2 9012
0087,
Email: info@seatingdynamics.com.au
For more information on Bodypoint products, and a list of
distributors outside the USA go to www.bodypoint.com.
MDSS GmbH
Schiffgraben 41
D-30175 Hannover
Germany
EvoFlEx
™
PElvic StabilizEr
Installation and User's Instructions
Art Nos. EB205, EB225, EB235
558 First Ave. South, Suite 300 | Seattle, WA 98104
206.405.4555 | 800.547.5716
www.bodypoint.com | email: info@bodypoint.com
BPI092-au 2012.2