Advertisement
Filling
Always disconnect the Iron from the electrical
■
outlet before filling.
In areas with 'soft' water, tap water may be used in
■
the Iron. In areas with 'hard' water use distilled water
marketed as suitable for use in irons (not chemically
descaled or softened water).
1. Set the Temperature Control Dial
Steam Control
2. Lift the Water Inlet Cover
3. Using a suitable jug slowly pour water into the Water Inlet
(pouring too fast will cause water to overflow).
4. Do not fill past the MAX marking.
5. Close the Water Inlet Cover
Wipe away any spillage before proceeding.
■
Switching on
1. Make sure your ironing board is stable and level.
2. Set the Temperature Control Dial
3. Sit the Iron on its Heel Rest
Turn on the power socket if necessary.
4. The Thermostat Light
5. Turn the Temperature Control Dial
When the Iron reaches the selected temperature the Thermostat Light
The Iron will then maintain the temperature with the Thermostat Light
when the Soleplate
Setting the temperature
The maximum temperature items should be ironed at is usually shown on the care label.
Care Symbol
Temperature
Iron multiple items in order of the temperature they require, starting with the lowest.
Dry Ironing
If dry ironing (without water in the Water Reservoir
the Temperature Control Dial
to extinguish.
to ● and the
to
.
to open it.
.
to ● and the Steam Control
and insert the Plug
will illuminate.
is being heated.
Fabric Type
Cool
Nylon, acrylics, polyester
Warm
Wool, polyester mixtures
Hot
Cotton, linen
DO NOT IRON
N/A
to the desired heat level and wait for the Thermostat Light
into a suitable power socket.
to the desired ironing temperature.
) set the Steam Control
Steam Iron
to
.
will extinguish.
illuminating
Temperature Control Dial
●
● ●
● ● ● MAX
N/A
to
. Turn
Advertisement
