Installation - VIPAR SPECTRA Reflector Series User Instructions

INSTALLATION

PART II Installation Instructions
1. Remove this lighting equipment from packaging.
2. Joining the buckles to the hanging holders one by one.
3. Hanging the light on a hard, stable bracket or the ceiling of grow tent with the carabiner.
4. Install this lighting equipment above your plants - Do not proceed unless it's safely and
securely mounted.
5. Plug power cord into this lighting equipment (do not plug into wall yet).
6. Turn off both switches ("O" means off).
7. Power on this lighting equipment by plugging into wall socket and turn on the switch.
4