Advertisement
INSTALLATION INSTRUCTIONS
PART I Safety Information
1. CAUTION: UV and IR emitted from this lighting equipment, do not look directly at the LED
bulbs when the lighting equipment is working. This lighting equipment has passed Risk
Group 2 (IEC 62471).
2. CAUTION: The minimum required distances between adjacent lighting equipment is
4 inches(10cm) and between the lighting equipment and combustible materials is
40 inches(100cm) such as walls, ceilings, movable partitions, and the like (providing
this installation limitations are needed to prevent overheating of lighting equipment or
combustible materials within the installation environment).
3. The maximum temperature of the installed environment (ambient temperature) that will
ensure safe operation of the lighting equipment. So you will need to control the
temperature within the installed environment. (Example: a mechanical ventilation or
cooling system is required to maintain the temperature within the growing space below
104°F (or 40℃) when the lighting equipment is in operation).
4. Instructions to guide the installation such that cords:
a. Are not concealed or extended through a wall, floor, ceiling, or other parts of the
building structure,
b. Are not located above a suspended ceiling or dropped ceiling,
c. Are not permanently affixed to the building structure,
d. Are routed so that they are not subject to strain and are protected from physical damage,
e. Are visible over their entire length, and
f . Are used within their rated ampacity as determined for the maximum temperature of
the installed environment specified in the instructions.
5. This lighting equipment is Indoor use only. Not water-proof, protect your lighting equipment
from dampness, dust and water.
Advertisement
