Activities during operation Precautions and warnings Patient auscultation mode using the application without connection Additional information to the StethoMe AI medical product Classification of the medical product Patient auscultation mode using the application with connection Markings to the StethoMe AI medical product...
Page 3
Patient auscultation mode without using the application Turning the stethoscope off Maintenance and cleaning Troubleshooting Technical specifications Electromagnetic compatibility and compliance with standards Storage, transport, and operation conditions Servicing 10. Manufacturer 11. Warranty document...
1. Introduction The aim of this manual is to describe a medical product – the StethoMe electronic stethoscope – taking into account the following in particular: 1.1 About the manual • description of the medical product, This manual is a part of a medical product - the StethoMe electronic stethoscope.
1.3 Symbols and marks used in the manual the StethoMe AI medical product for the purposes of auscultation sound analysis.. Warnings and safety measures that have to be followed in order to avoid CAUTION! Any other application of the medical product is considered personal injury! inconsistent with the intended use and has to be excluded.
• Prior to commencing examination it is necessary to become familiarised in detail with this medical product’s user manual available at the address: www.StethoMe.com. • This medical product is an electronic stethoscope. It is certified and should be used • This medical product is not intended for diagnostics in emergency conditions! Remember! solely for recording the respiratory system or heart auscultation sounds, and transmitting If you suspect any hazard to life or health (e.g.
Page 7
A plug and constitutes a part of the complete set. • The stethoscope should be stored in closed original packaging, in a place beyond • Do not perform examinations with the stethoscope or put it to the body while it is being charged. the sight and reach of children.
• When the product is being charged, all its functions, including data transmission, are blocked. • The stethoscope does not include any parts that can be replaced by the user on their own. • This manual should be retained so that it can be consulted again in the future if necessary.
Protect against humidity - fragile 3.1 Equipment Degree of watertightness Easily breakable load The set includes: 1. StethoMe stethoscope, CAUTION! IMPORTANT! Please familiarise yourself 2. special USB - mini jack 3.5 mm cable, Please read the manual carefully with the user manual 3.
IMPORTANT! In order to take advantage of all features of StethoMe, it is required to have a device (e.g. phone, tablet, computer) with an approved application The main elements of the stethoscope are presented on Fig. 1a and Fig. 1b. installed and with Internet access.
3.3 Connectors The stethoscope is connected to the charger The StethoMe stethoscope is fitted with a single 3.5 mm mini jack socket intended for: • connecting earphones, Lung auscultation filter is active • connecting the USB - 3.5 mm mini jack cable, included in the set supplied, in order to charge the stethoscope (the stethoscope is inactive while being charged).
The lists of the devices supported by our partner should be available at their websites. 2. In order to charge the stethoscope it is necessary to connect it to a charger using only the Always use the most recent version of the application. You can download it from cable provided.
4. It is necessary to launch the approved application, which will establish connection to the stethoscope The StethoMe stethoscope can be used in one of the three modes listed below: after the type of examination is selected. Depending • using the application without connection to the StethoMe AI medical product, on the quality of connection between the devices, •...
1. Select in the application whether you want to auscultate lungs or heart by touching the appropriate icon. 2. Making a recording consists in putting the stethoscope membrane (Fig. 4) to the patient’s body at specific spots indicated in the application / on the stethoscope screen and holding the stethoscope at each spot until the progress bar is filled.
3. The active auscultation spot can also be selected without using the application. It is enough finished automatically. to make a gesture with the stethoscope by moving it to the right or to the left. 3. The auscultation spot can also be selected without using the application. It is enough to 4.
• red colour - abnormal auscultation sounds have been detected, • red circle - not recorded, In order to use the StethoMe stethoscope without the application, it is enough to connect • red circle with a cross - analysis impossible (low quality of recording or excessive noise).
5.4 Turning the stethoscope off • Make sure that the water does not reach the inside of the stethoscope. If the stethoscope is not used, it will automatically enter the sleep mode. It is not necessary to 7. Troubleshooting turn it off after each use. If it becomes necessary to turn off the stethoscope completely, this can be done by knocking six times on the device screen.
Standards. The stethoscope complies with European regulations and features the CE 2274 mark. maintenance service at the e-mail address: support@StethoMe.com The quality of the stethoscope has been verified and complies with provisions of the Council Directive (EC) 93/42/EEC on medical products of 14th of June 1993.
10. Manufacturer 11. Warranty document StethoMe sp. z o.o. company having its seat in Poznań in Poland at the address ul. Winogrady StethoMe sp. z o.o. 18A, entered into the Entrepreneur Register kept by the District Court Poznań - Nowe Miasto 61-663 Poznań;...
Need help?
Do you have a question about the stethoscope and is the answer not in the manual?
Questions and answers