Scope Of Delivery; Using The Torque Tester - Gedore Dremotest E 8612-012 Operating Instructions Manual

2.1

Scope of Delivery

Electronic Torque Tester
Power Unit
100 – 240 V; 50 – 60 Hz; maximum 500 mA
Note: See rating plate.
Wrench Sockets
(1x extension piece for 8612-3150) (WAF and drive
according to design size)
Operating Instructions
Calibration Certificate
Shipping Package
RS232 Cable
3.

Using the Torque Tester

ALWAYS read Section 1 (Important Safety Information)
BEFORE using the torque tester.
The instructions describe the use of the following product
types:
Torque tester with external hexagon or internal square
adaptor on the side
Torque tester with external hexagon adaptor on the front
The test process is represented schematically by a torque
tester with side adaptor (external hexagon) for the torque
wrench. The procedures for the test process using the front
adaptor for the torque wrench are exactly the same.
The direction of rotation is clearly marked on the torque tester
housing.
EN
11