X2E XORAYA DATACUBE-N1 User Manual page 10

User Manual
PC/Switch

Connect PC or switch via a standard network cable to one of the ports (H-I).

Ensure proper connector seating.
Power supply
CAUTION
Device damage due to wrong power supply
A wrong power supply can result in damage or destruction of the D
N1.




Connect the power cord with AC adapter to port (E).

Tighten the connector screws.

Connect the power cord to a power supply that meets the technical specifications.
Use the provided power cord with AC adapter to connect the
D -N1 to the power supply.
ATACUBE
Only connect the D
ATACUBE
specifications on the AC adapter label.
The power supply must provide a current of 15 A.
-N1 to power supplies that meet the
10
X D -N1
ORAYA ATACUBE
-
ATACUBE