Connecting The Supply Hose - LG F8K5XN3 Owner's Manual

6
Place the front-loading washing machine on
top of pedestal washing machine.
• Make sure the 4 legs are totally locked and
the holes of the pedestal washing machine
align with the holes of the front-loading
washing machine.
7
Securely attach the two appliances at the
corners using 14 type A screws.
• First, insert screws on each side. Then
insert screws on the front and back side.
NOTE
• It can be difficult to assemble if it is not
assembled in the proper order.
• Use two type C screws to assemble the
stacking holder.
1
Stacking holder
8
Turn the feet of the front-loading washing
machine slightly until it is snugged up
against the pedestal washing machine.
NOTE
• Pedestal washing machine will not work as a
standalone unit.
14
Washer leg
1
2

Connecting the Supply Hose

• Water supply pressure must be between 0.1
MPa and 0.8 MPa (1.0‒8.0 kgf/cm
• Do not overtighten the water supply hose.
• If the water supply pressure is more than
0.8 MPa, a decompression device should be
installed.
• Periodically check the condition of the hose
and replace the hose if necessary.
Washer leg
• Contact the service centre if there is no rubber
seal.
Checking the Rubber Seal on the
Supply Hose
Two rubber seals are supplied with the water
supply hoses. They are used for preventing
water leaks. Make sure the connection to taps is
sufficiently tight.
3
).
2
Hose connector
Rubber seal
Hose connector
Rubber seal
EN