Table of Contents
Advertisement
CONTROL PANEL
BUTTONS
1. POWER
2. UP
3. DOWN
POWER
If the unit is plugged in but not in operation, the LED Display will display nothing. Press the POWER key
to turn the unit on. It will begin working automatically. The display will show the desired humidity on the
left and relative humidity on the right.
To turn the unit off, press POWER. The water pump will turn on automatically for 40 seconds to drain in
the remaining water and turn off automatically. Do not switch the power off by disconnecting the Power
Cord from the outlet. To avoid water spillage, do not move the dehumidifier for at least three minutes
after turning the power off.
TIME
Press TIME to display current working time in hours and minutes. For example, if it displays "0000:50",
it means that it has been in operation for 50 minutes. To view the total working time, press "T" once
more within 10s. If "T" is not touched for 10s, the display returns automatically returns to displaying
the humidity. The current working time can be reset by pressing "T" for 5s continuously. Resetting the
current working time will not affect the total working time.
Note: The total working time can not be deleted. If the time is beyond the range of LED showing time, it
will be deleted and recount from the start.
4. LED Display
5. PURGE
6. TIME
CONTROL PANEL
7. Purging Indicator
8. Defrosting Indicator
9. Running Indicator
6
Advertisement
Table of Contents
