Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Proper Manuals
  4. Racks & Stands
  5. iPad Swivel Stand
  6. Installation manual

Proper iPad Swivel Stand Installation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
iPad Swivel Stand
Installation Guide

Advertisement

loading

Related Manuals for Proper iPad Swivel Stand

Summary of Contents for Proper iPad Swivel Stand

  • Page 1 Swivel Stand Installation Guide...

  • Page 2: Before You Begin

    Before You Begin Power Loosening and Tightening Screws This product includes a (2m) 8-Pin Lightning to USB cable. Overtightening the screws may cause damage to the Before installation, ensure your device is within reach of stand, or your device. If you feel as though something isn’t a power source.

  • Page 3: Product Overview

    Product Overview Apple iPad This product is designed to be compatible with Apple iPad (5th & 6th Generation). (Not included with the stand) Powered iPad Lock Belt This is the ‘belt’ that secures your iPad in place, conceals the charging cable, and keeps your device securely attached to the stand.
  • Page 4 The Toolkit Hex Key / Pick Tool Security Tool Use the Hex Key for hexagonal screws shaped like this. Use the Security Tool for star Note: Only required for removing shaped screws like this. the Lock Belt from the stand. The Pick Tool is used to lift off end caps.

  • Page 5: Mounting Options

    Mounting Options Tail Tunnel Tailing your cable from the rear of the stand Tunneling your cable through the table surface requires you to feed the cable through the stand requires you to make a 35mm hole directly beneath before you secure it down. the stand, through the table/countertop.
  • Page 6 Use the Pick Tool to lift off the metal end caps from the Lock Belt. Use the Security Tool to remove the 4 screws holding the cassette in place.
  • Page 7 Lift the inner cassette out of the aluminum frame of the Lock Belt. This is where you will secure the iPad. Use the Security Tool to remove the 2 screws holding the end cap in.
  • Page 8 Ensure the Lightning port is aligned in the correct orientation. (See Home button indentation) Re-install the screws with the Security Tool to keep your iPad locked into place.
  • Page 9 Connect the Lightning cable to the iPad. There are clips underneath to hold it in place. Pass the USB end of the cable through the stand. Note: See Mounting Options on Page 5.
  • Page 10 Use the Security Tool to attach the iPad to the frame. 10. Push the end caps back onto the frame to secure the iPad in place. Peel the backing off the adhesive base. Note: If you intend to tunnel the charging cable beneath the stand, you will first need to make a 35mm hole.
  • Page 11 Press down firmly on the base to adhere the stand in place. 13. If possible, leave the stand overnight, allowing the adhesive time to bond to the surface properly before use.