Page 1
Remote Controller Getting Started Guide A-CONTROL6 Before starting please check www.digico.biz for the latest firmware and documentation. AP11451 Issue 1...
Page 2
("Warranty Period"). This warranty does not apply to any non-DiGiCo (UK) Ltd branded hardware products or any software, even if packaged or sold with DiGiCo (UK) Ltd hardware. Please refer to the licensing agreement accompanying the software for details of your rights with respect to the use of software/firmware (“EULA”).
Firmware is updated regularly as new features are added and improvements made. Software licence agreement By using this DiGiCo (UK) Ltd product and the software within it you agree to be bound by the terms of the relevant End User Licence Agreement...
Contents IMPORTANT - Read before starting ................3 Introduction ....................... 6 Mounting the Remote Controller................ 7 Plinth mount ....................7 Front Panel ......................8 Rear Panel ...................... 10 Connect and power up ..................11 Set up the unit Name and IP Address ............ 11 4REA4 connection ..................
12V Power Supply 1. Introduction The A-CONTROL6 is part of the DiGiCo A-Control Series of remote controllers. It interfaces with the DiGiCo mixing system via standard TCP/IP Network connections and can therefore be networked with other controllers, computers and third-party devices using a standard Ethernet infrastructure.
2. Mounting the Remote Controller The A-CONTROL6 can be used free standing or mounted on a standard microphone with the DiGiCo Mic Stand Adaptor. Non-slip feet fitted for shelf use Top of mic stand with DiGiCo adaptor 2.1 Plinth mount Use the holes indicated below for 6B screws when mounting in a plinth, podium or furniture.
3. Front Panel – 2 sets of 6 x backlit assignable keys. Can be Buttons configured individually or as part of a vertical ‘Rotary Strip’. Available functions include Send On/Off, Solo, Mute, Snapshot Recall, Talkback Assign – 6x colour displays providing information LCD Displays on the channels and on the function of the buttons.
Page 9
– 6x assignable dual function rotary Rotary Encoders controls. Can be configured individually or as part of a vertical ‘Rotary Strip’. Push and turn a rotary to control its second function. Available functions include Input Level, Mix Level, CG Level, Aux Send Level, FX Send Level, Matrix Send Level, Pan.
CAT5 or higher cables. Those with both foil and braided screens provide shielding from interference and are generally more rugged. Stranded core cables are less prone to damage when kinked or repeatedly coiled. Refer to www.digico.biz for a list of CAT5 cables available to order. Ext DC In –...
Network port. Use the 4REA4 Controller software to edit the A- CONTROL6 network settings. Once applied, repeat the operation for each A-CONTROL6 unit. Refer to the 4REA4 Reference Guide available for download at http://www.digico.biz for more information. A-Control6 Getting Started Guide AP11451 Issue 1...
5.2 4REA4 connection Connect the A-CONTROL6 to a 4REA4 Network port using a CAT5 cable up to 100m long. Power up the A-CONTROL6 by plugging the external PSU into the DC In socket or connecting using a CAT5 cable to a PoE switch. The port Lnk/Err indicator flashes at a steady rate when the link is established.
The functions and assignments of the A-CONTROL6 are stored in the 4REA4. They are not stored locally on the Remote Controller. Refer to the 4REA4 Reference Guide available for download at www.digico.biz for more information on configuring the Remote Controller. A-Control6 Getting Started Guide AP11451 Issue 1...
7. Technical specs System Network Fast Ethernet 100MBps Ext DC In +12V, 2.5A 802.3af (15.4W at source) Max power consumption Operating Temperature Range 0 deg C to 35 deg C (32 deg F to 95 deg F) Dimensions and Weights Width x Depth x Height x Weight A-CONTROL6 250 x 208 x 98 mm x 1.25kg (2.76lbs)