Download Print this page

Sealey ST80 Instructions page 2

Advertisement

 Remove excess solder from the soldering iron by wiping the tip on a damp, natural sponge; not by abrupt force.
 DO NOT attempt to remove excess solder from the soldering iron by shaking it. Hot solder may become airborne and land on skin causing
burns and blisters.
 DO NOT allow children or pets into the area where the soldering is taking place.
 DO NOT attempt to cool the gun with water.
NOTE: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
2. INTRODUCTION
80W Soldering Station with large LCD display and backlight. Three adjustable heat settings with ± 10°C accuracy as well as manual temperature
selection. Features auto-standby and shutdown, settable between 1-120 minutes to ensure reduced energy consumption. Takes just 10 seconds to
heat from 0-350°C. ESD Safe. Supplied with soldering sponge and aluminium soldering iron stand.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ST80
Supply/Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V/80W
Frequency:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50Hz
Heating Element Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28V AC
Temperature Stability: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±2°C (in still air, no load)
Temperature Accuracy: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±10°C
Maximum Temperature range:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150-480°C/302-896°F
Tip-to-Ground resistance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <2Ω
Tip-to-Ground Voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .<2mV
4. OPERATION
© Jack Sealey Limited
1 . . . . . . . . . . Set Temperature Mode
2 . . . . .Real-Time Temperature Mode
3 . . . . . . . . . . . . . . . Calibration Mode
4 . . . . Temperature Stored: Channel1
5 . . . . Temperature Stored: Channel2
6 . . . . Temperature Stored: Channel3
7 . . . . . . . . Analogue Current Display
8 . . . . . . . . . . . . . . Fahrenheit Values
9 . . . . . . . . . . . . . . . . .Celsius Values
10 . . . . . . Real-Time Tip Temperature
Original Language Version
fig.1
fig.2
ST80 Issue:1 31/03/15

Advertisement

loading