modway EEI-2680 Manual page 3

EEI-2680/2681
STEP 3:
Put Bottom Panels (3) upside down on a carpeted or padded area.
Position 1 piece of Bottom Panel (3) to the assembled Top panel (1) and Side Panels (2) as shown.
Please confirm the assembled Double-ended Bolts (A) and Dowels (B) have been inserted into the pre-drilled holes in
Bottom Panel (3) fully.
Insert 6 pieces of Nut (C) with 6 pieces of Flat Washer (D) into the assembled Double-ended Bolts (A) as shown.
Use Box Wrench (E) to tighten all the Nuts (C) clockwise until secure.
Cx6 Dx6
STEP 4:
Position 1 piece of Legs (4) to the assembled Top Panel (1), Side Panels (2), and Bottom Panel (3) as shown.
Insert 2 pieces of Bolt (F) with 2 pieces of Flat Washer (D) into the pre-drilled holes In ihe Bottom Panel (3) through the
holes In the Leg (4).
Use Allen Wrench (G) to tighten Bolts (F) clockwise until secure.
Repeat the same steps for the other piece of Leg (4).
Tear off the sticker on the 4 pieces of Mats (H).
Carefully attach 4 pieces of Mat (H) to Legs (4) as shown.
Dx4 Fx4
Customer Service 908-368-1025︱www.modwayfurniture.com
TV STAND
E
E
C
D
3
Ex1
G
D
F
4
3
Gx1 Hx4
3
2
2
H
4
3
4
2
1
2
2
1
Hardware & Tool required
4
2
Hardware & Tool required
Page 3 of 4