Subscribe to Our Youtube Channel
Related Manuals for Cookworks UM 1036
Summary of Contents for Cookworks UM 1036
- Page 1 1.5 litre Glass Blender Model No. UM 1036 Care & Instruction Manual For household and indoor use only Please read these instructions before use and retain for future reference ISSUE-123/11/2017...
- Page 2 Electrical safety • You should only plug the appliance into a 220V‐240V AC, 50Hz supply. Connecting it to other power sources may damage the appliance and will invalidate the guarantee. • Switch off and unplug if unattended and before assembling, disassembling or cleaning.
- Page 3 Warning! • This appliance is intended exclusively for use in domestic households. It is not suitable for commercial use. • Only use with the parts supplied and fully assembled. • Never place hands or utensils inside the jug whilst the blender is in use.
- Page 4 Parts Stopper/ measuring cup Glass jug Blades Motor housing Handle Pulse button Speed control knob Suction cup feet ISSUE-123/11/2017...
- Page 5 Assembly Fig 1 Fig 2 IMPORTANT: Your blender is equipped with a safety feature, where the blades will not operate unless the base of the jug and motor housing are fully locked. 1. Fit the seal onto the underside of the jug and fit the blade assembly as shown (fig 1.).
- Page 6 To use 1. Clean thoroughly before use. 2. Place the blender base on a stable surface, check that the speed control knob is in the OFF (0) position, fully unwind the cable and plug in. 3. Ensure all ingredients are close to room temperature. Never use hot ingredientsas this can cause the glass jug to shatter.
- Page 7 Cleaning Clean the blender after each use. 1. Switch off and unplug. 2. The glass jug, lid, stopper, blades and seal may be washed in hot water with a little washing up liquid taking care not to handle the blades. Rinse and wipe dry.
- Page 8 Plug / Wiring advice The wires in this mains lead are coloured in accordance with the following UK electrical code: BLUE = NEUTRAL BROWN = LIVE Non-rewireable plug This appliance may be fitted with a “non‐rewireable” plug. If you need to change the fuse in a “non‐rewireable” plug, the fuse cover must be refitted.
- Page 9 ISSUE-123/11/2017...
Need help?
Do you have a question about the UM 1036 and is the answer not in the manual?
Questions and answers