Page 1
Personal Blender Model No. UM1050S2N1‐X Care & Instruction Manual For household and indoor use only Please read these instructions before use and retain for future reference ISSUE-1 20/10/2017...
Page 2
Electrical safety You should only plug the appliance into a 220V‐240V AC, 50Hz supply. Connecting it to other power sources may damage the appliance and will invalidate the guarantee. Switch off and unplug when not in use and before assembling, disassembling, changing accessories or cleaning the appliance.
Page 3
Warning! This appliance is intended exclusively for use in domestic households. It is not suitable for commercial use. Only use with the parts supplied and fully assembled. Do not cover the personal blender and allow the motor housing it ...
Page 4
Assembly & use IMPORTANT: Your blender is equipped with a safety feature, where the blades will not operate unless the base of the jar and motor housing are fully locked. Fig 1 Fig 2 Fig 3 Fig 4 1. Remove the lid from the storage position at the end of the blending jar.
Page 5
7. Fit the blade assembly onto the jar and turn clockwise to secure (fig. 2). When fitting, grasp around the side only (fig. 5) – do not touch the blade or any part of the inner mechanism. Ensure the assembly is screwed on firmly; otherwise leakage or non-function may result.
Page 6
Notes: The motor housing is fitted with an interlock mechanism to prevent operation without the jar in place. In the event the motor does not operate, re-check steps 7 and 8 above have been followed correctly. For the best taste and nutritional value use fresh fruit and drink ...
Page 7
Technical specification Rated voltage 220-240V AC 50/60Hz Power consumption 300W Maximum work time minute Class rating 2 (double insulated) BS 1362 fuse Capacity 500ml ISSUE-1 20/10/2017...
Page 8
Plug / Wiring advice The wires in this mains lead are coloured in accordance with the following UK electrical code: BLUE = NEUTRAL BROWN = LIVE Non-rewireable plug This appliance may be fitted with a “non‐rewireable” plug. If you need to change the fuse in a “non‐rewireable” plug, the fuse cover must be refitted.
Need help?
Do you have a question about the UM1050S2N1-X and is the answer not in the manual?
Questions and answers