Advertisement
A S S E M B LY I N S T R U C T I O N S
T R I O S I D E T A B L E
Sope of delivery:
1 x tabletop, 1 x adapter plate, 1 x tripod table leg, 1 x screw set for
HPL tabletop (4 x M5 x 10 countersunk screw, 1 x Allen key 3 mm), 1 x screw
set for teak tabletop (4 x M6 x 16 countersunk screw, 1 x Allen key 4 mm),
1 x M8 tubular socket wrench, 2 x M8 hex screw, 2 x washer
Assembly:
Place the table top on a flat, level surface with the bore holes facing upward.
The scope of delivery includes 2 different sets of screws. Please ensure you use
the correct screws for the material of your tabletop! Now attach the adapter plate
to the tabletop using the 4 countersunk screws.
At first, only lightly tighten the screws. Finally, tighten them firmly, working
diagonally.
Now screw the tripod table leg to the adapter plate using the two hex screws
and washers.
Advertisement
