Weishaupl TRIO Assembly Instructions

A S S E M B LY I N S T R U C T I O N S
T R I O B I S T R O - A N D B A R T A B L E
Sope of delivery:
1 x tabletop, 1 x table column with folding table adapter,
1 x tripod table leg, 1 x screw set for HPL tabletop (4 x M5 x 20 fillister head
screw, 1 x Allen key 3 mm), 1 x screw set for teak tabletop (4 x M6 x 25 fillister
head screw, 1 x Allen key 4 mm), 4 x washer for fillister head screws, 1 x M8
tubular socket wrench, 2 x M8 hex screw, 2 x washer
Assembly:
Place the table top on a flat, level surface with the bore holes facing upward.
The scope of delivery includes 2 different sets of screws. Please ensure you use
the correct screws for the material of your tabletop! Now attach the table column
with the folding table adapter to the tabletop using the 4 fillister head screws
and washers.
At first, only lightly tighten the screws. Finally, tighten them firmly, working
diagonally.
Now screw the tripod table leg to the tabletop in the position shown, using the
two hex screws and washers.
The stability of the table can be finely adjusted with the help of the adjusting
screws.
Tripod table leg
Folding table
release lever