Table of Contents
Advertisement
SECTION 1- MAIN FRAME ASSEMBLY
Assemble the Main Frame by using the provided tools Wrench and Allen Key as shown in
Figure 1.
Note: 1) At least two people are required to erect the Main Frame and Leg Tubes.
2) Make sure legs are positioned so that frame legs sit flush on ground, with peg hole
facing out and away from swing.
Figure 1
At the beginning, do not over tighten the screws when assembling the Legs (Part# A11 & A12)
to the Top Support Tube (Part# A10). This will make it easier to make final alignment and
adjustment. Once all screws have been properly aligned, tighten them securely.
ACTION SPORTS EQUIPMENT PTY LIMITED – www.actionsports.com.au
Page: 10
Advertisement
Table of Contents
