Onboard Headers And Connectors - ASROCK athena A1 User Manual

1.7 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.
LPC Debug Header
(13-pin LPC1)
(see p.4, No. 1)
FAN Connector
(4-pin FAN1)
(see p.4, No. 3)
USB 2.0 Header
(9-pin USB3_5_6)
(see p 3, No. 2)
IP Camera Signal
Connector
(6-pin CAM)
(see p 3, No. 8)
IP Camera Power
Connector
(2-pin CAM_PWR1)
(see p 3, No. 6)
10
PCIRST#
FRAME
PCICLK
+12V
GND
1
FAN_SPEED
FAN_SPEED_CONTROL
DUMMY
MDI3N
MDI2P
MDI1N
MDI1P
MDI0N
MDI0P
1
+12V
GND
1
This connector supports a
Trusted Platform Module
system, which can securely
store keys, digital certificates,
passwords, and data. A TPM
system also helps enhance
network security, protects
digital identities, and ensures
platform integrity.
Please connect the CPU FAN
cable to the connector.
There is one USB 2.0 header on
this motherboard. This USB 2.0
header can support two USB
2.0 ports.
Please connect the IP Camera
Signal cable to the connector.
Please connect the IP Camera
Power cable to the connector.