Advertisement
LOCATION OF CONTROLS
1. SPEAKERS
2. POWER BUTTON
3. CD DOOR
4. DIAL SCALE
5. POWER INDICATOR
6. CD LED DISPLAY
7. CD REPEAT INDICATOR
8. FM STEREO INDICATOR
9. CD PLAY/PROGRAM
INDICATOR
10. AUX IN BUTTON
11. CD PUSH OPEN AREA
12. CD PROGRAM BUTTON
13. PHONES JACK
14. FUNCTION SWITCH
15. CD SKIP UP BUTTON
16. BAND SWITCH
17. VOLUME CONTROL
18. CASSETTE DECK
19. TUNING CONTROL
20. CD REPEAT BUTTON
21. CD RANDOM BUTTON
22. SKIP DOWN BUTTON
23. CD PLAY/PAUSE BUTTON
24. CD STOP BUTTON
25. BUILT-IN CONDENSER MIC.
26. CASSETTE FUNCTION KEYS
ALIGNMENT
27. FM TELESCOPIC ANTENNA
28. SPEAKER JACKS
29. HANDLE
30. AC SOCKET
31. AC VOLTAGE SELECTOR
(FOR DUAL VOLTAGE
VERSION ONLY) (OPTIONAL)
32. BATTERY COMPARTMENT
2
SPEAKER CONNECTION
To attach speakers to the main unit, align the grooves of main unit and the
speaker box, slide the speaker box downwards, push the speaker latch in a
direction indicated on the lock to lock the Speaker box, then insert the plug of
speaker wire into Speaker Jack (L&R).
WARNING:
Speaker must be plugged into Speaker Jack firmly before switch on
the power of main unit.
POWER SUPPLY
This unit is designed to be operated from two different types of power sources
as listed below:
*
DC OPERATION
This set runs on 8 pcs "UM2" or "C" type batteries.
always use heavy duty alkaline batteries.
TO INSTALL BATTERIES
Ê
Remove the Battery Compartment Cover by gently pushing downward
and outward. Insert 8 pcs "UM2" or "C" type batteries.
BE SURE TO PLACE THE BATTERIES AS PER THE ENGRAVED
DIAGRAM INSIDE THE COMPARTMENT.
Ë
Replace the cover.
NOTE:
Old batteries may swell and leak. To avoid damage to your
instrument, remove the batteries when the unit is to be stored for
long periods of time or if the batteries become exhausted.
NOTE:
To use your set on battery power, you MUST remove the AC cord
from both the wall outlet and the back of the set.
*
AC OPERATION
Plug the AC power cord into AC socket, and the other end of the cord into
the standard household outlet as shown.
NOTE:
For dual voltage version, make sure that the AC Voltage Selector is
switched to your local voltage (optional).
For best performance,
3
Advertisement
