Page 2
M302SK TURNTABLE WITH CD/MP3/CASSETTE PLAYER, PLL RADIO, AUX IN, CLOCK ALARM, REMOTE CONTROL AND BUILT-IN SPEAKER INSTRUCTION MANUAL READ THIS INSTRUCTION MANUAL CAREFULLY BEFORE USE...
Product Features 33/45/78 RPM selectable turntable Automatic / manual stop turntable Belt driven system Programmable CD/MP3 player Slot-in cassette player Direct USB/SD encoding for CD, turntable, cassette, FM radio & aux in Aux in for connection of other device (eg. Cassette player & mobile phone) USB/SD slot for MP3 playback PLL radio with preset 20 AM &...
Caution: Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This unit should not be adjusted or repaired by anyone except qualified service personnel. Warning: The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
Cancel alarm: During standby mode, when “Clock” icon is on, press TIMER button (7), “Clock” icon will be off. Snooze function Press “SNOOZE” button on the remote control when alarm in active, alarm will be silent for 10 minutes. After 10-minutue snooze interval, alarm will be active again.
Remark:- The recording speed is 1:1 and according to the actual playing time of FM or FM-ST radio The recording format is preset at – MP3 bit rate : 128 kbps During FM & FM-stereo radio encoding, radio frequency is fixed and cannot be tuned Phono &...
Press the “TAPE FAST FORWARD / EJECT” button completely, then the playing will be stopped and the cassette tape will be ejected. Remark : Make sure the direction is correct when inserting the tape. To avoid damaging the tape, it is highly recommended to take out the tape after listening.
Page 8
Playback of MP3/WMA Song via USB Storage Media or Memory Card Connecting The system is able to decode and playback all MP3 / WMA file which stored in the memory media with USB connecting port or SD/MMC memory card. Plug-in the USB plug with the face up & make sure it going into completely or insert the memory card in the direction of the arrow as shown in the label on the underside of the memory card slot cover.
Page 9
Set at “USB” or “CARD” mode, then press STOP button (3). Press MODE button (5), “MEM” will be flashing on LCD display. Moreover, it will indicate program number and digits for track number to be programmed. Select a desired track by pressing SKIP UP (13) or SKIP DOWN (2) button.
Page 10
II) Delete all track Insert the USB storage media or SD/MMC card, set in “USB” or “CARD” mode & set at stop mode after unit reading. Press and hold DEL button (6) for 3-5 seconds, then “ONE” will be flashing on the display. Press SKIP UP (13) / SKIP DOWN (2) button to select “ALL”...
Copying of CD The system allows you to copy the track from CD to USB or SD by 1 track, 1 folder or all files. I) Copy 1 track Insert the USB storage media or SD/MMC card, press FUNCTION button (8) to “CD” mode. Press REC button (6) during the playback of the copying track from CD, then “ONE”...
Remote Control Battery installation The infra-red transmitter requires 1 pc CR2025 lithium battery for operation. Button description STANDBY: Trigger between standby mode and operation mode. PRESET/ALBUM DN: Perform same function as “ALBUM DOWN / PRESET DOWN” button (14) on the unit. PRESET/ALBUM UP: Perform same function as “ALBUM UP / PRESET UP”...