Advertisement
Quick Links
ASSEMBLY INSTRUCTIONS
Style # H0316 / H0318 Foldable Wall Desk
NOTE TO CUSTOMERS:
For ease and speed of assemble we recommend that before you commence each step of the assembly that you
identify all the parts required to complete that step.
We recommend that where possible you allow sufficient space to assemble the item as close as possible to the
place where it will be once assembled.
For the protection of your furniture we recommend that the product is placed on protected surfaces during
assembly to prevent any damage.
During assembly do not over tighten, as this may damage the product.
Please ensure you retain all the product packaging until the item completely assembled.
Please periodically check all fittings and re-tighten as necessary.
Never allow any liquids to remain on your furniture as absorption can cause the wood to warp or the finish to
de-laminate.
It is recommended that this item should be assembled by two adults.
Page 1 of 11
Advertisement
Related Manuals for 2K FURNITURE DESIGN HO316
Summary of Contents for 2K FURNITURE DESIGN HO316
- Page 1 ASSEMBLY INSTRUCTIONS Style # H0316 / H0318 Foldable Wall Desk NOTE TO CUSTOMERS: For ease and speed of assemble we recommend that before you commence each step of the assembly that you identify all the parts required to complete that step. We recommend that where possible you allow sufficient space to assemble the item as close as possible to the place where it will be once assembled.
- Page 2 Page 2 of 11...
-
Page 3: Part List
Part List Quantity Quantity Quantity Quantity of 1 of 1 of 1 of 1 Middle Shelf Bottom Panel Left Side Panel Right Side Panel Quantity Quantity Quantity Quantity of 2 of 1 of 1 of 1 Top Panel Right Shelf Back Panel Left Shelf Quantity... - Page 4 Step 1: 2SETS 4PCS Assemble Divider (A10) to Middle Shelf (A3) and Bottom Panel (A4) using Camlocks (B1) and Wood Dowels (B2). Step 2: 1SET 2PCS Assemble Right Shelf (A6) to Divider (A10) using Camlocks (B1) and Wood Dowels (B2). Then insert Cap (B8) to cover B1 as shown above.
- Page 5 Step 3: 2PCS 3SETS 3PCS Assemble Top Panel (A7) and Connect Bar (A9) to Left Side Panel (A1) using Bolt with nuts &washers (B3) and Wood Dowels (B2). Then cover the holes by Caps (B8) as shown above. Step 4: 2PCS 1SET 3PCS...
- Page 6 Step 5: 6PCS 2SETS 7PCS 5SETS Assemble Middle Shelf (A3 ),Bottom Panel (A4) & Top Panel (A7) to the Right Side Panel (A2) using Bolt with nuts & washers (B3) and Wood Dowels (B2) & Camlocks (B1). Then cover the holes by Caps (B8) as shown above.
- Page 7 Step 7: 9PCS Assemble Folding Desk Top (A11) via attached hinge on the bottom of desk top with Screws (B5) to Bottom Panel (A4) as shown above. Step 8: B10: 2PCS Wall 15.75"W 57"H 57"H Floor For your safety please insert Anchors (B10) into the wall as above drawing shown. Page 7 of 11...
- Page 8 4PCS Step 9: when opening the desk please make sure to use both grooves on the front panel at the same time. 1. Attach Safety Lock (B6) to Desk using included Screws (B5). 2. Open Desk carefully as above drawing shown, open the desk by using both grooves on the front panel at the same time. Page 8 of 11...
- Page 9 Step 10: Wall 8PCS B10: 2SETS Floor 1. Assemble Desk to the wall using Screws and Flat Washers (B 10) as above drawing shown. 2. Insert Shelf Supports (B7) into the holes on Desk , then put Shelves (A5) on top of Shelf Supports (B7). Page 9 of 11...
- Page 10 Step 11: Diagram 2 Warning: 1. Max load capacity 100lbs. 2. Only use chalk to write on the blackboard. Wall 3. Only use whiteboard marker to write on the whiteboard. Diagram 1 When closing the desk, unlock the safety hinge by pushing it in slightly(see diagram 1) , then fold the desk back and lock with top safety lock(see diagram 2) NOTE: Please be cautious when closing the safety hinge, in order not to get your fingers trapped in the hinge.
- Page 11 APPENDIX: Dimension of Hardwares in this AI. Cam-bolt Cam-nut wood dowel Screw Screw Screw B10. Screw Page 11 of 11...