Subscribe to Our Youtube Channel
Related Manuals for TECSYSTEM T1168
Summary of Contents for TECSYSTEM T1168
- Page 1 TECSYSTEM S.r.l ® INSTRUCTION MANUAL T1168 TECSYSTEM S.r.l. 20094 Corsico (MI) Tel.: +39-024581861 Fax: +39-0248600783 http://www.tecsystem.it R. 1.2 07/09/12 T1168...
- Page 2 All the substances banned by the above mentioned Directive are excluded by such product. TECSYSTEM inform that up to now significant results of the long-time tests on lead-free weldings are not available. Therefore, any defect of the welding won’t be covered by the guarantee.
- Page 3 Make 4 holes on the fixing surface as shown in the “FIXING TEMPLATE” at page 2. 3) SUPPLY T1168 monitoring unit must be fed just with 230 VAC. To terminal 41 must always be con- nected the ground. When the monitoring unit is directly fed by the secondary winding of the transformer to be protected, it can be damaged by high-intensity overvoltages.
- Page 4 4) FLAT CABLE FOR CONNECTION WITH THE FRONT PANEL T1168 monitoring unit has a flat cable connection to connect the motherboard with the front panel mounted on the cover. It is possible to remove the flat cable to make easier the mounting or maintenance operations;...
- Page 5 TECSYSTEM S.r.l ® 10) DISPLAY MODE The monitoring unit displays, in scanning way, (every 2 seconds) the temperature of all the channels (Ch1, Ch2, Ch3) 11) WORKING PROGRAM CONTROL To check the programmed temperature values, shortly press PRG key to enter the program display mode.
- Page 6 16) RULES FOR WARRANTY The Product purchased is covered by manufacturer's warranty or the seller's terms and conditions set forth in the "General Conditions of Sale Tecsystem srl", available at www.tecsystem.it and / or purchase agreement. The warranty is considered valid only when the product will be damaged by causes attri- butable to TECSYSTEM srl, such as manufacturing or components defects.
- Page 7 If this problem should persist, please contact TEC- SYSTEM S.r.l. Technical Department Temperature indicated by one or more channels Contact TECSYSTEM S.r.l. Technical Department is wrong. Verify that the terminal box screws are correctly Sudden trip of main switch. Temperature is on tightened.
- Page 8 TECSYSTEM S.r.l ® NOTES: T1168...
Need help?
Do you have a question about the T1168 and is the answer not in the manual?
Questions and answers