Memory Function; Multi-Stage Cooking - Toshiba MM-EM20P Instruction Manual

OPERATION

14. MEMORY FUNCTION

(1) Press "0/MEMORY" to choose memory 1-3 procedure. The
(2) If the procedure has been set, press " START/ +30 SEC. " to use it. If not, continue to
set the procedure. Only one or two stages can be set.
(3) After finishing the setting, press " START/ +30 SEC. " once to save the procedure and
turn back to the waiting states.If press " START/ +30 SEC. " again,it will start cooking.
Example: to set the following procedure as the second memory, that is memory 2.
to cook the food with 80% microwave power for 3minutes and 20 seconds.
The steps are as follow:
a. In waiting states, press "0/MEMORY " twice,stop pressing until the screen displays "2".
b.Press "TIME COOK " once,then press "3","2","0" in order.
c. Press "POWER" once,"PL10" display,then press "8" and "PL8" displays.
d. Press "START/ +30 SEC. " to save the setting. Buzzer sounds once then turn back to
waiting states. If you press "START/+30SEC."twice after step c, the procedure will be
saved as the memory 2 and operated.
e. If the electricity is not cut off, the procedure will be saved all the time. If it is, the
procedure need to reset.
f. If you want to run the saved procedure, in waiting states, press " 0/MEMORY " twice,
screen displays "2", then press " START/+30SEC. " to run.

15. Multi-stage cooking

At most 2 stages can be set for cooking. In multi-stage cooking, if one stage is
defrosting, then defrosting shall be placed at the first stage automatically.
Note: Auto cooking cannot work in the multi-stage cooking.
Example: if you want to cook with 80% microwave power for 5 minutes + 60% microwave
power for 10 minutes. The cooking steps are as following:
(1) Press " TIME COOK " once,then press "5","0","0" to set the cooking time;
(2) Press " POWER" once,then press "8" to select 80% microwave power.
(3) Press " TIME COOK " once,then press "1","0","0","0" to set the cooking time;
(4) Press " POWER" once,then press "6" to select 60% microwave power.
(5) Press " START/ +30 SEC. " to start cooking.
20
screen will display 1,2,3.