Download Print this page

Room&Board Flynn Crib Assembly Instructions

Download this manual

CRIB ASSEMBLY INSTRUCTIONS

for Flynn Crib

PARTS INCLUDED IN CARTON

2 – END PANELS

2 – SIDES

1 – MATTRESS SUPPORT PLATFORM

2 – FEET

PARTS INCLUDED IN HARDWARE BAG

8 – BOLTS (50mm)

4 – BOLTS (70mm)

12 – LOCK WASHERS

4 – SERRATED BOLTS (20mm)

1 – BALL END ALLEN WRENCH

Need help?

Do you have a question about the Flynn Crib and is the answer not in the manual?

Page 1 CRIB ASSEMBLY INSTRUCTIONS for Flynn Crib PARTS INCLUDED IN CARTON 2 – END PANELS 2 – SIDES 1 – MATTRESS SUPPORT PLATFORM 2 – FEET PARTS INCLUDED IN HARDWARE BAG 8 – BOLTS (50mm) 4 – BOLTS (70mm) 12 – LOCK WASHERS 4 –...
Page 2 WARNING: CRIB ASSEMBLY INSTRUCTIONS AILURE TO FOLLOW For Flynn Crib THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Read all instructions before assembling crib. CAUTION: ANY MATTRESS USED IN THIS CRIB • Keep instructions for future use.
Page 3 CRIB ASSEMBLY INSTRUCTIONS for Flynn Crib DO NOT USE POWER TOOLS! STEP 1: Mount one Side (with the mounting blocks toward the floor and the inside of the crib) to the rear edge of the End Panels. Use four 50mm Bolts and Lock Washers to fasten the side to the end panels. DO NOT tighten the bolts completely yet.
Page 4 FLYNN CRIB ASSEMBLY INSTRUCTIONS STEP 1 – Attach back to End Panels STEP 2 – Attach Mattress Platform STEP 3 – Attach front to End Panels Toddler Rail (sold separately) Flip crib over to replace one side with toddler rail. Remove foot STEP 4 –...