Advertisement
Carbon cladding KIT installation instruction
Fasten the new splash panel magnet assembly to
4.
the unit. (Use spacer and screw provided in the
kit)
Slide the drip tray over the two brackets protrud-
5.
ing from the bottom of the unit until the tray seats
fully on the two detents in the brackets.
Place the new cup rest provided in the kit into the
6.
appropriate mounting grooves in the drip tray.
7.
Place the drip tray cladding on the drip tray.
Publication Number: 629097674INS
Table 4. Installation Procedure
- 4 -
Figure 3.
Figure 4.
Figure 5.
Figure 6.
© 2017, Cornelius Inc.
Advertisement
