Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
F
I
IELD
NSTALLATION
S
I
AFETY
NSTRUCTIONS
!
WARNING:
Before starting installation, read and understand all safety label and warnings on the machine. Also review and
understand all safety instructions in the owners, installation and service manuals.
Failure to comply could result in serious injury, death or damage to the equipment.
Q
S
UALIFIED
ERVICE
!
WARNING:
Only trained and certified electrical, plumbing and refrigeration technicians should service this unit.
All wiring and plumbing must conform to national and local codes. Failure to comply could
result in serious injury, death or equipment damage.
S
P
AFETY
RECAUTIONS
This unit has been specifically designed to provide protection against personal injury. To ensure continued
protection observe the following:
!
WARNING:
Disconnect power to the unit before servicing. Follow all lock out/tag out procedures established by the user. Verify all
power is off to the unit before performing any work.
Failure to comply could result in serious injury, death or damage to the equipment.
!
CAUTION:
Always be sure to keep area around the unit clean and free of clutter.
Failure to keep this area clean may result in injury or equipment damage.
Revision Date: October 04, 2017
© 2017, Cornelius Inc.
I
NSTRUCTIONS FOR KIT
& 629097676(4FL)
Carbon cladding KIT installation instruction
P
ERSONNEL
www.cornelius.com
Carbon cladding KIT installation instruction
P/n 629097674(2FL), 629097675(3FL)
- 1 -
Revision: A
Publication Number: 629097674INS
Advertisement
Summary of Contents for Cornelius 629097674
- Page 1 Carbon cladding KIT installation instruction INSTALLATION INSTRUCTIONS P/n 629097674(2FL), 629097675(3FL) IELD NSTALLATION NSTRUCTIONS FOR KIT & 629097676(4FL) Carbon cladding KIT installation instruction AFETY NSTRUCTIONS WARNING: Before starting installation, read and understand all safety label and warnings on the machine. Also review and understand all safety instructions in the owners, installation and service manuals.
- Page 2 Carbon cladding KIT installation instruction NSTRUCTIONS Parts List: Table 1. 629097674 Kit- Viper Carbon Cladding Kit - 2FL Sl. No. Part No. Description Quantity 620061546 CUP-REST 2FL VIPER ELITE CARBO 620063393 PANEL SPLASH MAGNET ASSY 2FLV 620063511 SPACER RETAINER 1/2" DIA #10-3...
-
Page 3: Installation
Disconnect power from the unit. Remove the drip tray by sliding it forward off the mounting brackets. Figure 1. Unscrew the two mounting screws. Remove the splash panel behind the drip tray. Figure 2. © 2017, Cornelius Inc. - 3 - Publication Number: 629097674INS... - Page 4 Place the new cup rest provided in the kit into the appropriate mounting grooves in the drip tray. Figure 5. Place the drip tray cladding on the drip tray. Figure 6. Publication Number: 629097674INS - 4 - © 2017, Cornelius Inc.
- Page 5 Figure 8. Fasten retaining bracket with hex nut PN 70076. Repeat process for the other side of the splash panel. Figure 9. © 2017, Cornelius Inc. - 5 - Publication Number: 629097674INS...
- Page 6 Carbon cladding KIT installation instruction Table 4. Installation Procedure Plug in unit to restore power to the unit. This completes the task. Figure 10. Publication Number: 629097674INS - 6 - © 2017, Cornelius Inc.