Safety And Maintainence - Orca mark 1 Initial Setup Manual

Safety and Maintenance
SAFETY GUIDELINES
In order to achieve maximum safety while using your ORCA Mark I, we suggest that you
adopt the following guidelines:
1. Should you have trouble operating the device properly, unplug and/or remove
the device and contact the VORO Support; or go to www.voromotors.com for
assistance. Do not attempt to fix the device yourself.
2. Do not take apart the device (doing so will void your warranty) and do not
attempt to operate it under abnormal current loads.
3. Charge the ORCA Mark I in accordance with the recommended charging time and do
not leave the battery charging overnight. Do not use the ORCA Mark I while it is
charging.
4. Do not expose the ORCA Mark I to liquids while charging. Exposing the Mark I to
these conditions may result in an electric shock.
5. The ORCA Mark I is water resistant however; do not submerge the Mark I in liquid for
more than 30 min at a depth of more than 1 meter.
6. Do not tamper or abuse the Mark I; including but not limited to dropping,
crushing, excessive bending, puncturing, shredding, microwaving, incinerating, or
inserting foreign objects into the Mark I.
7. Do not use abrasive cleaners and/or harsh cleaning agents to clean the Mark I.
8. Do not expose the Mark I to extremely high or low temperatures such as leaving
the Mark I in direct strong sunlight or in snowy weather for extended periods of time.
9. Do not expose the Mark I to open flames such as stoves, candles, or fireplaces.
10. Dispose the product in accordance with your local environmental laws and
guidelines.
| 10