Orca mark 1 Initial Setup Manual page 14

Safety and Maintenance
MAINTENANCE TIPS
In order to achieve maximum longevity while using your ORCA Mark I, we suggest that you
adopt the following guidelines:
1. Clean and dry your Mark I regularly, particularly in areas in contact with mud or
rainwater. Use a clean, damp cloth. Do not wash product under a faucet, or use any
form of water jet to spray it. (Common sense, guys!)
2. Even though the Mark I is rated IP67 water resistant grade and you can ride under
rain, but do not use a water jet to clean the scooter.
3. Avoid leaving your Mark I to charge overnight, unplug once it is fully charged.
4. Clean the product off from time to time.
BATTERY
The Mark I contains an internal, lithium-ion polymer rechargeable battery. In general, the
life expectancy of this battery depends upon use, and usually last a really long time. If
the battery does not charge after several attempts, it may be non-operational and you
may need to contact customer support. Do not attempt to replace the Mark I's battery
yourself.
TRACKING
The accuracy of our sensors and associated calculations (i.e. distance traveled and riding
speed) will vary with use.
| 11