Relocking The Scanner - AGFA StudioStar Owner's Manual

Relocking the scanner

If you need to transport the scanner over long distances, you should first pull down the carriage
lock. This will protect the scanner's optical assembly from possible damage.
1. Place the scanner on a horizontal, flat surface and pull it forwards until you can see the carriage
lock on the underside.
2. Turn on your scanner.
The scanner's optical assembly moves to its home position.
3. When the ready indicator (the middle yellow one) stops blinking, pull the carriage lock down.
Your scanner is locked.
4. Switch off your scanner.
Chapter 1 — Preparing the scanner 8