Battery Use - Motorola A920 Instruction Manual

batteries perform best after several charge/discharge
cycles.
Do This
1 Plug the charger
in with the
release tab up.
2 Plug the other end of the charger into an
electrical outlet. While the battery is charging,
Charging Battery and the battery's current
charge level (Very Low to High) displays on the
screen.
3 When Charging Complete displays, press the
release tab and remove the charger. The typical
time needed to fully charge the battery is 3
hours.

Battery Use

Battery performance depends on your wireless carrier's
network configuration; signal strength; temperature;
features and settings you select and use; and your voice,
data, and other application use.
Caution: To prevent injuries or burns, do not allow metal
objects to contact or short-circuit the battery terminals.
To maximize your battery's performance:
21