Table of Contents
Advertisement
7、Function instructions
（2）On the shared screen: if WIFI is not connected, press the [up
/ down] key of the remote control to select the
press the [OK] key to enter the WIFI setting interface to connect WIFI
(see section 7.9). Make sure that the mobile phone and the sharing
screen are connected to the same WIFI.
（3）On the shared screen: press the [OK] key to start the DLNA.
The interface displays: "DLNA has been started, WIFI has been con-
nected": for example, " TP_LINK_3522 "and wait for the user to connect"
hi2611dlna_9465 ".
DLNA
DLNA has been started, WIFI has been connected: "TP_LINK_3522 "
wait for the user to connect" hi2611dlna_9465 "
- 12 -
button, and
WIFI
Advertisement
Table of Contents
